The life span is 15000 hours. High efficiency, the maximum flow rate is up to 29.5 LPM / 7.5GPM. The lift can reach 4M / 18FT.

The Stainless Steel Center Inlet Pump 115V is a homebrew beer pump, which is typically used to transfer hot and/or cold liquids between brewing vessels. This pump is designed for home brewing only. Not intended for any other pumping use or application. The pump is NOT Self Priming! Do Not Run Dry. The pump head must be flooded with liquid prior to turning on the pump. The four screws on the pump head may be removed and the pump head can be rotated as required to fit your piping system. Always disconnect power before performing work on or near the pump motor.